Toshiba e-STUDIO2330C Service Handbook page 509

Ver.01
Page
- GENERAL PRECAUTIONS
The weight of the equipment has been corrected from "approximately 120 kg (264.55 lb.)"
to "approximately 121 kg (266.75 lb.) or 123 kg (271.16 lb.)".
1-2 1.1.1 General
The version name of the equipment has been added to "Machine version".
The weight of the equipment has been corrected from "Approx. 120 kg (264.55 lb.)" to
"Approx. 121 kg (266.75 lb.) (for NAD and MJD) and Approx. 123 kg (271.16 lb.) (for oth-
ers)".
1-12 1.3 Options
The model name of the EFI Printer Board has been corrected from "GA-1300" to "GA-
1211".
1-14 1.5 System List
The model name of the EFI Printer Board has been corrected from "GA-1300" to "GA-
1211".
2-40 Description of the contents of 05-7322 has been added.
2-67 The code 08-8822 has been deleted from [IPsec].
2-70 The classification of the codes 08-9883 and -9884 has been corrected to "Hardcopy secu-
rity printing".
2-97 The default values of 08-1214, -1216, -1218, -1220 and -1228 have been corrected.
2-101 The default values of 08-5600, -5602, -5604 and -5606 have been corrected.
3-4 3.1.2 Adjustment of the Auto-Toner Sensor.
The illustration of the procedure in step (5) has been changed.
5-12 The contents of C6 and C7 in the table in "5.5.3 Feed unit" have been corrected.
5-20 "H9: Developer unit upper cover" has been added to the figure and the table in "5.5.8
Developer unit (K, Y, M, and C)".
5-22 The content of "Handling precautions" in "*J1: Transfer belt" has been corrected.
5-23 "Handling precautions" and "Cleaning procedure" of "*J8: Transfer belt cleaning blade"
have been added.
5-25 "M12" in the figure of "5.5.13 Fuser unit" has been corrected to "M2".
5-32 In the table, "FR-KIT-FC35" has been corrected to "FR-KIT-FC28", "FR-FC35-U" has been
corrected to "FR-FC28-U" and "HR-FC35-L" has been corrected to "HR-FC28-L".
6-100 New items to check have been added to "CE71 Drum phase adjustment abnormality".
7-10 A disassembling procedure in "7.1.11 Board case" has been changed from step (2) to (2),
(3), (4) and (5), and from step (3) to (6).
7-23 The model name of the EFI printer board in "[K] Set EFI Printer Board" has been corrected
from "GA-1300" to "GA-1211".
7-26 The model name of the EFI printer board in "[K] Set EFI Printer Board" has been corrected
from "GA-1300" to "GA-1211".
"[G] Reinstall options" has been added.
7-29 A procedure in "7.3.1 Precautions when disposing of the HDD" has been changed.
8-5 The data file name "menteusb2.o" of update program loader in the table "Program neces-
sary for updating" has been corrected to "mentusb2.o".
8-7 Precautions for options (GP-1070/1080, GS-1010/1020) have been added to "Important".
The data file name "menteusb2.o" of update program loader in the table "Program neces-
sary for updating" has been corrected to "mentusb2.o".
8-18 A data writing error handling procedure has been added to "[A] Precautions when writing
the data".
8-21 A note for update procedure has been added.
A procedure for unplugging and re-plugging the power cable has been added.
8-22 A procedure for unplugging and re-plugging the power cable has been added.
9-6 "Noise filter" has been added to the diagram in "9.6 Configuration of Power Supply Unit".
- "10.1 DC Wire Harness" error corrected
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Ver.01 <2008.04.24>
Contents
9
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
REVISION RECORD