Toshiba e-STUDIO2330C Service Handbook page 174

(5) When the adjustment has finished normally, "ENTER" is shown. Press the [ENTER] button to
have the adjustment results reflected.
(To cancel the reflection of adjustment results, press the [CANCEL] button.)
In the case of an abnormal ending, "ADJUSTMENT ERROR" is shown.
Press the [CANCEL] button to clear the error display. When it is cleared, the control panel display
will return to the ready state. Then, check if the patch chart on the original glass is placed in the
wrong direction or if it is placed inclined on the original glass, and then repeat step (3) and
afterward.
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
ADJUSTMENT
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
3 - 30