Toshiba e-STUDIO2330C Service Handbook page 231

[C] Print out "FUNCTION" list
(1) Press the [USER FUNCTIONS] button.
(2) Press the [ADMIN] button, enter the password, and then press the [ENTER] button.
(3) Press the [LIST/REPORT] button and then the [LIST] button.
(4) Press the [FUNCTION] button. The "FUNCTION" list is printed out.
Note:
Explain the procedure to the user (machine administrator) and ask him/her to enter his/her
password.
[D] Enable data encryption function
Perform the setting of the data encryption function in the code 08-9379. The setting values are shown
below.
0: Encryption disabled
1: Encryption enabled (Security priority)
2: Encryption enabled (Performance priority)
Security priority: All user data are encrypted.
Performance priority: Encryption data are generated only in a copying or a printing process temporarily.
All user data except files which are deleted in a corresponding process are encrypted.
[E] Format HDD
Perform the code 08-690:2 to format the HDD.
When the FAX Unit (GD-1250) is installed, perform "Fax Set Up (1*-100)" and "Clearing the image data
(1*-102)". Then turn the power OFF.
1. Turn the power ON while pressing the digital keys [1] and [*] simultaneously.
2. Key in [100] and then press the [START] button.
3. Key in [102] and then press the [START] button.
4. Turn the power OFF.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
4 - 13
BACKUP FUNCTION
4