Pm Support Mode - Toshiba e-STUDIO2330C Service Handbook

5.4

PM Support Mode

5.4.1 General Description
This equipment has a PM support mode which enables you to confirm the use status of each part (the
number of output pages or developed pages, and drive counts) requiring periodic replacement and also
the replacement record, as well as resetting counter values efficiently. This record can be printed out in
the list print mode.
5.4.2 Operational flow
Clear finished
* The screen goes back to the main screen when the counter clear is performed or the [CANCEL]
button is pressed after moving from the main screen, while it goes back to the sub screen after
moving from the sub screen.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
PM support mode activated
[6]+[START]+[POWER]ON
[RETURN] pressed [2] [START]
Main screen
Main unit list displayed
Main unit chosen
[CANCEL] pressed
[RESET]
Clear screen
Counter clear
confirmation displayed
[INITIALIZE]
pressed
Counter clear performed
Fig. 5-2
5 - 5
Main unit chosen
[SUB UNIT] pressed
[RETURN]
pressed
Sub screen
Sub unit list displayed
[CANCEL]
pressed
Sub unit chosen
[RESET] pressed
Clear finished
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
PREVENTIVE MAINTENANCE (PM)
5