7.2.5
Procedures and settings when replacing the SLG board
When the SLG board has been replaced, make sure to follow the procedure below.
(1)
Confirm that the power is turned OFF.
(2)
Replace the SLG board.
SERVICE MANUAL "7.6.12 SLG board (SLG)"
(3)
Perform "Data transfer of characteristic value of scanner / SYS board -> SLG board (05-363)".
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
7 - 23
REPLACEMENT OF PC BOARDS/HDD
7