Toshiba e-STUDIO2330C Service Handbook page 372
Multifunctional digital color systems
Hide thumbs
Also See for e-STUDIO2330C:
- Service manual (1246 pages) ,
- Service handbook (546 pages) ,
- Management manual (226 pages)
Table of Contents
Advertisement
(10) Clear all "Image quality control abnormal detection counter Y to K display/0 clearing (08-573 to
576)".
(11) Check if any of the springs for supplying power to the transfer belt unit is deformed. Replace the
spring if it is deformed.
[CE50] Temperature/humidity sensor abnormality
Is the connector CN342 on the LGC board or the connector of the temperature/humidity
sensor disconnected?
Is the harness between the LGC board and the temperature/humidity sensor disconnected?
YES
NO
1. Replace the temperature/humidity sensor.
2. Replace the LGC board.
[CE60] Drum thermistor Y abnormal
[CE90] Drum thermistor K abnormal
Is the harness between the LGC board and the drawer connector for developer unit
disconnected?
Is the harness inside of the developer unit and the harness of the drum thermistor Y or K
disconnected?
Is the connector CN340 on the LGC board, or the connector of the drum thermistor Y or K
disconnected?
YES
NO
1. Replace the drum thermistor Y or K.
2. Replace the LGC board.
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
ERROR CODE AND TROUBLESHOOTING
Connect the connector securely. Replace the harness.
Reconnect the connector. Replace the harness.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
6 - 96
Hide quick links:
Advertisement
Table of Contents
