Toshiba e-STUDIO2330C Service Handbook page 437

(5) Select the item with the digital keys.
"*" is displayed next to the selected item. Display or delete the "*" by pressing the number of the
item.
Item
1. OS Update
2. HDD SYS Update
3. Engine Main Firmware Update
4. Scanner Firmware Update
(6) Press the [START] button.
Updating starts and the processing status is displayed on the LCD screen.
Status display during update
OS Update.......................... FROM write
HDD SYS Update ............... Copy file
Engine Firm Update........... Flash Update
Scanner Firm Update ..........Flash Update
(7) "Update Completed." is displayed at the bottom of the LCD screen after the updating is
completed properly.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Remarks
Updating OS data
Updating Master data and System data
Updating Engine ROM
Updating Scanner ROM
Status display when update is completed
OS Update.......................... Completed
HDD SYS Update ............... Completed
Engine Firm Update........... Completed
Scanner Firm Update ..........Completed
Fig. 8-3
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
8 - 9
FIRMWARE UPDATING
8