Toshiba e-STUDIO2330C Service Handbook page 508
Multifunctional digital color systems
Hide thumbs
Also See for e-STUDIO2330C:
- Service manual (1246 pages) ,
- Service handbook (546 pages) ,
- Management manual (226 pages)
Table of Contents
Advertisement
Page
8-23
8.2.3 Engine ROM - [A] Update procedure
Step 6: The illustration has been corrected.
Step 11: The procedure for shutting down the equipment has been changed to turning OFF
the power with the main switch.
8-26
8.3.1 Scanner ROM - [A] Update procedure
Step 8: The procedure for shutting down the equipment has been changed to turning OFF
the power with the main switch.
8-28
8.3.2 RADF firmware (MR-3018) - [A] Update procedure
Step 7: The procedure for shutting down the equipment has been changed to turning OFF
the power with the main switch.
8-30
8.3.3 Finisher firmware (MJ-1101) - [A] Update procedure
Step 7: The procedure for shutting down the equipment has been changed to turning OFF
the power with the main switch.
8-34
8.3.4 Converter Firmware (MJ-1101) - [A] Update procedure
Step 12: The procedure for shutting down the equipment has been changed to turning OFF
the power with the main switch.
8-35
8.3.5 Hole punch unit firmware (MJ-6101) - [A] Checking the hole punch position
Step 1: The procedure has been changed to turning OFF the power with the [ON/OFF] but-
ton.
Step 3: The procedure has been changed to turning ON the power with the [0], [8] and [ON/
OFF] buttons.
Step 4: A procedure to set the DIP-SW1 back has been added as step (4).
8-37
8.3.5 Hole punch unit firmware (MJ-6101) - [B] Update procedure
Step 10: The procedure for shutting down the equipment has been changed to turning OFF
the power with the main switch.
8-41
8.3.6 Finisher firmware/Saddle stitcher firmware (MJ-1030) - [A] Update procedure
Step 8: The procedure for shutting down the equipment has been changed to turning OFF
the power with the main switch.
8-44
8.3.7 Finisher firmware (MJ-1031) - [A] Update procedure
Step 9: The procedure for shutting down the equipment has been changed to turning OFF
the power with the main switch.
8-47
8.3.8 Fax unit firmware (GD-1250) - [A] Update procedure
Step 7: The procedure for shutting down the equipment has been changed to turning OFF
the power with the main switch.
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
REVISION RECORD
Ver.02 <2008.06.26>
Contents
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
8
Hide quick links:
Advertisement
Table of Contents
