Toshiba e-STUDIO2330C Service Handbook page 326

Multifunctional digital color systems

Hide thumbs Also See for e-STUDIO2330C:

Table of Contents

[ED15] Paddle home position error

1. Rotate the paddle. If there is any mechanical problem, fix its mechanism.

2. Check if the connectors on the finisher controller PC board are disconnected from the paddle

home position sensor (S3) and the paddle motor (M8), or the harnesses are open circuited.

Correct if any.

3. Replace the paddle motor (M8).

4. Replace the paddle home position sensor (S3).

5. Replace the finisher controller PC board.

[ED16] Buffer tray home position error

1. Open and close the buffer tray guide. If there is any mechanical problem, fix its mechanism.

2. Check if the connectors on the finisher controller PC board are disconnected from the buffer tray

home position sensor (S5) and the buffer tray guide motor (M3), or the harnesses are open

circuited. Correct if any.

3. Replace the buffer tray guide motor (M3).

4. Replace the buffer tray home position sensor (S5).

5. Replace the finisher controller PC board.

e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C

ERROR CODE AND TROUBLESHOOTING

Show Quick Links

Table of Contents