Toshiba e-STUDIO2330C Service Handbook page 143

[D] Setting
Perform the S-ACS operation setting referring to the table.
S-ACS operation setting <Copy>: (08)9934-0
S-ACS operation setting <Print>: (08)9934-1
S-ACS operation setting <Box>: (08)9934-2 (The setting value must be the same as that of <Print>.)
Setting value of the
S-ACS operation
setting
9
25% or less
2
2 25 to less than 50%
2 or 1 50 to less than 75%
1 75% or more
Since each value in the printing status is indicated as a guide to set the S-ACS operation, the setting
value does not have to correspond exactly.
Flow chart for determining setting values
Determine each setting value with the color rate.
S-ACS operations setting
50% or more
Setting value
"1"
When the default setting of color
modes is [Black] or [Full Color]
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Color rate MCV
5k or more
less than 5k
-
25% or less
Color rate
25 to less
than 50%
Setting value
"2"
Fig. 2-11
2 - 117
Printing status
S-ACS level
coefficient
23 or more
17 to less than 23
17 or less
17 or less
5k or more
MCV
less than 5k
When the default setting of color
modes is [Auto Color]
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
Default setting of
the color mode
[Auto Color]
[Black] /
[Auto Color] /
[Full Color]
Setting value
"9"
SELF-DIAGNOSTIC MODE
2