Toshiba e-STUDIO2330C Service Handbook page 314

Multifunctional digital color systems

Hide thumbs Also See for e-STUDIO2330C:

Table of Contents

[E870] RADF open jam

1. Close the RADF if it is opened. Remove if there is any original before closing it.

2. Is the RADF opening/closing sensor working? (Perform the input check: 03-[FAX]ON/[7]/[D])

* If it is working properly, proceed to 6. If not, check 3 to 5 below.

3. Check if the connector CN75 on the RADF board is disconnected from the RADF opening/

closing sensor or the harnesses are open circuited. Correct if any.

4. Replace the RADF opening/closing sensor.

5. Replace the RADF board.

6. Is the RADF opening/closing sensor adjusted within the specified range?

e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C

ERROR CODE AND TROUBLESHOOTING

Show Quick Links

Table of Contents