Table of Contents
Advertisement
USB storage device (control-panel menu)
1.
Copy the xxxxxxx.bdl file to a portable USB flash drive.
2.
Turn the product on, and then wait until it reaches the Ready state.
3.
From the Home screen on the product control panel, scroll to and touch the
button.
4.
Touch the
5.
Insert the portable USB storage device with the xxxxxxx.bdl file on it into the USB port on the
front of the product, and then touch the
6.
Touch the xxxxxxx.bdl file, and then touch the
TIP:
select the correct file for this product.
7.
When the product prompts you to confirm the upgrade, touch the
When the upgrade is complete, the product will initialize.
NOTE:
8.
When the upgrade process is complete, print a configuration page and verify that the upgrade
firmware version was installed.
470
Chapter 2 Solve problems
USB Firmware Upgrade
If there is more than one xxxxxxx.bdl file on the storage device, make sure that you
The upgrade process can take up to 10 minutes to complete.
button.
OK
button.
Upgrade
Device Maintenance
button.
Upgrade
button.
ENWW
Advertisement
Table of Contents
Troubleshooting
