3.
Turn the power on.
4.
If the error persists, replace the stapler assembly.
66.80.19 Output accessory failure To continue turn off then on
Description
Self-priming malfunction. Not able to complete self-priming after 11 attempts.
Recommended action
1.
Turn the power off.
2.
Make sure that the external paper handling accessory is clear of all packing materials and other
obstructions.
3.
Turn the power on.
4.
If the error persists, replace the stapler assembly.
66.80.33 Output accessory failure To continue turn off then on
Description
Output roller lift motor could not reach home.
Recommended action
1.
Turn the power off.
2.
Make sure that the external paper handling accessory is clear of all packing materials and other
obstructions.
3.
Turn the power on.
4.
If the error persists, replace the stapler/stacker alignment assembly.
69.11.YY Error To continue, touch "OK"
Description
This message displays to indicate an error during a duplex operation.
Recommended action
Turn the product off and then on.
70.00.00 Error To continue turn off then on
Description
The product experienced a DC controller failure.
362
Chapter 2 Solve problems
ENWW