HP LASERJET ENTERPRISE M725dn Troubleshooting Manual page 323

Table 2-29 Troubleshooting
First level Second level
Manual Sensor Test
Tray/Bin Manual
Sensor Test
ENWW
menu (continued)
Third level
Number of Copies
Fourth level Values
Range: 1–500
Default = 1
Select from a list of
available
components.
Reset Sensors
Select from a list of
available
components.
Reset Sensors
Description
Sets the default
number of copies for
a copy job. This
default applies when
the Copy or Quick
Copy function is
initiated from the
product Home
screen. The factory
default setting is 1.
Test the product
sensors and switches
for correct operation.
Each sensor is
displayed on the
control-panel screen,
along with its status.
Manually trip each
sensor and watch for
it to change on the
screen. Press the
Stop button to abort
the test.
Test the sensors in
the trays and bins for
correct operation.
Each sensor is
displayed on the
control-panel screen,
along with its status.
Manually trip each
sensor and watch for
it to change on the
screen. Press the
Stop button to abort
the test.
Tools for troubleshooting
291