Service Mode Functions; Service Menu - HP LASERJET ENTERPRISE M725dn Troubleshooting Manual

Service mode functions

Service menu

The Service
the Service
eight-digit personal identification number (PIN).
NOTE:
The product automatically exits the
selected or changed.
1.
From the Home screen on the product control panel, scroll to and touch the
button.
2.
Open the
3.
On the sign-in screen, select the
4.
Enter the following service access code for this product: 05072513.
The following menu items appear in the Service menu:
First level
Event Log
Clear Event Log
Cycle Counts
448 Chapter 2 Solve problems
menu is PIN-protected for added security. Only authorized service people have access to
menu. When you select
Service menu.
Second level
Total Engine Cycles
Refurbish Cycle Count
Maintenance kit count
Maintenance kit interval
Document Feeder Kit Count
Document Feeder Kit Interval
Clean Rollers Count
Clean Rollers Interval
ADF Count
Flatbed Count
Service from the list of menus, the product prompts you to type an
Service menu after about one minute if no items are
Service Access Code
Device Maintenance
option from the drop-down list.
Value Description
Allows you to print or view the
product event log.
Use this item to clear the product
event log.
Use this item to record the page
count when the product was
refurbished.
Set the total number of pages that
have been fed through the
document feeder.
Total number of pages since the
document feeder kit was replaced.
Set the total pages fed through the
document feeder.
Set the total pages scanned from
the flatbed.
ENWW