Table of Contents
Advertisement
Recommended action
Turn the product off, and then on and retry.
If the error persists, clear the firmware image from the active partition by using the
the Preboot menu.
33.01.01
Description
Read back data from ICB and pass to SR clients so that they can recover occurred Information.
Recommended action
This is an informational message, and no action is required.
33.01.02
Description
Save data received from SR clients is written into ICB NVRAM initial-save-occurred Information.
Recommended action
This is an informational message, and no action is required.
33.01.03
Description
Save and Recover functionality OK after previously being disabled. Save/Recover status OK
Information.
Recommended action
This is an informational message, and no action is required.
33.01.04
Description
A table from the ICB could not be found in the current firmware. The table data was ignored.
Recommended action
This is an informational message, and no action is required.
33.01.05
Description
A table from the ICB has different data than the table with a matching ID in the current firmware. The
table data was ignored.
ENWW
Partial Clean
Tools for troubleshooting
item in
339
Advertisement
Table of Contents
Troubleshooting
