Figure 2-33 Tray 4 Paper Size Sensor - HP LASERJET ENTERPRISE M725dn Troubleshooting Manual

Tray 4 paper size sensor (PS3303)
1. Remove Tray 4 from the HCI.
2. In the tray cavity, press and hold the tray presence switch (callout 1), and then lift the paper size
sensor lever (callout 2).
Figure 2-33
3. Check the control-panel display for sensor response.
4. If there is no response, replace the auto-close assembly.
174 Chapter 2 Solve problems
Tray 4 paper size sensor
1
2
ENWW