Recommended action
Turn product off and remove the excess tray accessories. Turn the product on.
Unsupported USB accessory detected Remove USB accessory
Description
A non-supported USB accessory has been installed.
Recommended action
Turn the product off, remove the USB accessory, and then turn the product on.
Upgrade complete To continue turn off then on
Description
The firmware upgrade is complete.
Recommended action
Turn the product off and then on.
USB accessory needs too much power Remove USB and turn off then on
Description
A USB accessory is drawing too much electrical current. Printing cannot continue.
Recommended action
Remove the USB accessory, and then turn the product off and then on.
Use a USB accessory that uses less power or that contains its own power supply.
USB accessory not functional
Description
A USB accessory is not working correctly.
Recommended action
1.
Turn the product off.
2.
Remove the USB accessory.
3.
Insert a replacement USB accessory.
USB hubs are not fully supported Some operations may not work properly
Description
Some USB hubs require more power than the product has available.
ENWW
Tools for troubleshooting
397