Table 2-4 Preboot Menu Options (4 Of 6); Table 2-5 Preboot Menu Options (5 Of 6) - HP LASERJET ENTERPRISE M725dn Troubleshooting Manual

Table 2-4 Preboot menu options (4 of 6)
Menu option First level
3 Administrator 7 Configure
LAN
continued
Table 2-5 Preboot menu options (5 of 6)
Menu option First level
3 Administrator 8 Startup
Options
continued
ENWW
Second level Third level
IP Mode
[DHCP]
IP Mode
[STATIC]
IP Address
Subnet Mask
Default
Gateway
Save
Second level Third level
1 Show
Revision
2 Cold Reset
3 Skip Disk
Load
4 Skip Cal
5 Lock Service
6 Skip FSCK
Description
Select the 7 Configure LAN
for the Preboot menu firmware upgrade.
The network can be configured to obtain the network settings
from a DHCP server or as static.
Use this item for automatic IP address acquisition from the
DHCP server.
Use this item to manually assign the network addresses.
Use this item to manually enter the IP address.
Use this item to manually enter the subnet mask.
Use this item to manually enter the default gateway.
Select the Save item to save the manual settings.
Description
Select the 8 Startup Options
set for the next time the product is turned on and initializes to
the Ready state.
Not currently functional: Check the
allow the product to initialize and show the firmware version
when the product reaches the Ready state.
Once the product power is turned on the next time, the
Revision item is unchecked so that the firmware revision is not
shown.
Check the 2 Cold Reset item to clear the IP address and all
customer settings (this item also returns all settings to factory
defaults).
NOTE:
Items in the Service
Select the 4 Skip Cal item to initialize the product the next time
the power is turned on without calibrating.
CAUTION:
Select the 5 Lock Service
menu access (both in the Preboot menu and the
Maintenance menu).
Service personnel must have the administrator remove the
Lock Service setting before they can open the
Select the 6 Skip FSCK item to disable Chkdisk/ScanVolume
during startup.
item to setup the network settings
item to specify options that can be
1 Show Revision item to
1 Show
menu are not reset.
item to lock the Service
Device
Service menu.
Preboot menu options
5
119