Replace supplies
Description
This alert appears only if the product is configured to stop when a supplies reach the very low
threshold. Two or more supplies have reached the estimated end of life. The product indicates when a
supply level is at its estimated end of life. The actual life remaining might be different than estimated.
The supply does not need to be replaced now unless the print quality is no longer acceptable.
HP recommends that the customer have a replacement supply available to install when print quality is
no longer acceptable.
NOTE:
When an HP supply has reached its approximated end of life, the HP Premium Protection
Warranty on that supply ends.
Recorded event codes depend on which supplies are at the end of life.
10.00.70 (event code): Black toner cartridge
◦
10.23.70 (event code): Fuser kit
◦
10.22.70 (event code): Transfer kit
◦
Recommended action
Press the
◦
Configure the product to continue printing by using the
◦
ROM disk device failed To clear touch "Clear"
Description
The specified device failed.
Recommended action
Press the
Clear
ROM disk file operation failed To clear touch "Clear"
Description
A PJL file system command attempted to perform an illogical operation.
Recommended action
Press the
Clear
ROM disk file system is full To clear touch "Clear"
Description
A PJL file system command could not store something on the file system because the file system was full.
ENWW
OK
button to find out which supplies need to be replaced.
button to clear the message.
button to clear the message.
Manage Supplies
menu.
Tools for troubleshooting
391