Figure 2-39 Tray 5 Feed Sensor - HP LASERJET ENTERPRISE M725dn Troubleshooting Manual

Tray 5 feed sensor (PS3305)
1. Remove Tray 5 from the HCI.
2. Place a business card between the feed roller and the separation roller as far as it will go to
activate the feed sensor.
Figure 2-39
3. Check the control-panel display for sensor response.
4. If there is no response, replace the paper pick-up assembly (left).
180 Chapter 2 Solve problems
Tray 5 feed sensor
ENWW