4.
Activate the desired sensor, and then check the control-panel display to verify the sensor state
(active or inactive).
The
●
sensor is active.
The
●
sensor is activated and increments by one each time the sensor is interrupted (activated or
deactivated).
For example, opening the flatbed cover increments the
times—once when the door is opened, and once when the door is closed.
5.
Touch the
-or-
Touch the
to return to the
Scanner tests sensors
ADF paper present
●
ADF (length) short
●
ADF (length) long
●
ADF slider 1
●
ADF slider 2
●
ADF slider 3
●
ADF jam cover
●
ADF paper path deskew
●
ADF paper path pick success
●
Paper path sensor 1 (unreachable)
●
Flatbed Y (length) short
●
Flatbed Y (length) long
●
Flatbed cover
●
182
Chapter 2 Solve problems
State
virtual LED next to the sensor number and sensor name illuminates green when the
Toggle
virtual LED next to the sensor number and sensor name illuminates green after the
Reset Sensors
button to reset the
Cancel
button to exit the
Diagnostic Tests
menu.
Toggle
count item.
Scanner Tests
screen, and then touch the
Flatbed cover Toggle
item count two
Cancel
button again
ENWW