HP LASERJET ENTERPRISE M725dn Troubleshooting Manual page 317

Table 2-28 Jetdirect Menu
First level Second level
Ping Results
ENWW
(continued)
Third level
Timeout
Count
Print Results
Execute
Packets Sent
Packets Received
Percent Lost
Fourth level Values
Default = 001
Default = 004
Yes
No*
Yes
No*
Default = 00000
Default = 00000
Default = 000
Description
Specify the length of
time, in seconds, to
wait for a response
from the remote host.
The maximum is
100.
Specify the number
of ping test packets
to send for this test.
Select a value from 0
to 100. To configure
the test to run
continuously, select
0.
No: Do not initiate
the selected tests.
Yes: Initiate the
selected tests.
Shows the number of
packets (0 - 65535)
sent to the remote
host since the most
recent test was
initiated or
completed..
Shows the number of
packets (0 - 65535)
received from the
remote host since the
most recent test was
initiated or
completed. The
default is 0.
Shows the percent (0
to 100) of ping test
packets that were
sent with no
response from the
remote host since the
most recent test was
initiated or
completed.
Tools for troubleshooting
285