Cloning Procedure - Toshiba e-STUDIO2820C Service Handbook

4.1.4

Cloning procedure

[A] Backup procedure
(1) Shut down the equipment.
(2) Connect the USB media to the USB port on the right upper cover.
Note:
Backing up cannot be performed with multiple USB media connected at the same time.
(3) Turn the power ON while pressing the [5] and [9] buttons simultaneously.
A screen for selecting items to back up is displayed. Select the number (any of "1", "3" and "5")
for data you want to back up. The selected item is displayed with an asterisk.
Number
1: User Data Back Up
3: Setting Back Up
5: SRAM Data Back Up
Notes:
• The screen above is not displayed if the data cloning function is disabled.In this case, ask the
user (machine administrator) to enable the data cloning function on the TopAccess menu.
• To clear your selection, press the digital key of the corresponding number again.
© 2008 TOSHIBA TEC CORPORATION All rights reserved
USB port
USB media
Fig. 4-2
Backup Item
Backing up User data
Backing up Setting item
Backing up SRAM data
Fig. 4-3
4 - 3
e-STUDIO2820C/2830C/3520C/3530C/4520C
BACKUP FUNCTION
4