Adjustment Mode (05) - Toshiba e-STUDIO2820C Service Handbook

Multifunctional digital color systems
Hide thumbs Also See for e-STUDIO2820C:
Table of Contents

Advertisement

2.4

Adjustment mode (05)

Items in the adjustment mode list in the following pages can be corrected or changed in this adjustment
mode (05). Turn ON the power with pressing the digital keys [0] and [5] simultaneously in order to enter
this mode.
Note:
When the power should be turned OFF, be sure to shut down the equipment by pressing the
[ON/OFF] button for a few seconds.
Notes:
The digit after the hyphen in "Code" of the following table is a sub code.
In "RAM", the SRAM of the board in which the data of each code is stored is indicated. "M"
stands for the LGC board and "SYS" stands for the SYS board.
2.4.1
Classification List of Adjustment Mode (05)
Classification
[Log table]
[Image position]
[Carriage position]
[Fixed value]
Scanner
[Shading position]
[Distortion]
[Reproduction ratio]
[Automatic dust
detection]
[ACS]
[RGB]
[Black header density
level adjustment]
[Fine line enhance-
ment swithchover]
[Leading edge adjust-
ment]
[Image density]
Image
[Color balance]
© 2008 TOSHIBA TEC CORPORATION All rights reserved
Adjustment Mode (05)
362, 3009
305, 306
359, 360
363, 364
350, 351
308
340
349
1675
1080, 1081, 1082, 8372
7811, 7812, 7816
7322-0 to 2, 7323-0 to 2, 8102-0 to 2, 8103-0 to 2
408, 410, 411, 428, 429, 440, 441, 442, 444, 445, 497-0 to 5, 498-0 to 1,
4065, 4066, 4067-0 to 6, 4562, 4563, 4564, 4565, 4567-0 to 5, 4568,
4732-0 to 1
503, 504, 505, 507, 508, 510, 512, 514, 515, 700, 710, 714, 725, 729,
845, 846, 847, 850, 851, 852, 855, 856, 857, 860, 861, 862, 863, 931,
934, 937, 940, 1585, 1586, 1587, 1588, 1589, 7475, 7478, 7641-0 to 2,
7642-0 to 2,
8210-0 to 3, 8211-0 to 3, 8212-0 to 3, 8213, 8214, 8215,
8249-0 to 4, 8250-0 to 4, 8251-0 to 4, 8252-0 to 4, 8253-0 to 4,
8254-0 to 4, 8340, 8341, 8342, 8344, 8345, 8346, 8348, 8349, 8350,
8371, 8380, 8381, 8382
1779-0 to 2, 1780-0 to 2, 1781-0 to 2, 1782-0 to 2, 1783-0 to 2,
1784-0 to 2, 1785-0 to 2, 1786-0 to 2, 1787-0 to 2, 1788-0 to 2,
1789-0 to 2, 1790-0 to 2, 1791-0 to 2, 1792-0 to 2, 1793-0 to 2,
1794-0 to 2, 1795-0 to 2, 1796-0 to 2, 1797-0 to 2, 1798-0 to 2,
7980-0 to 2, 7981-0 to 2, 7982-0 to 2, 7983-0 to 2,
8042-0 to 2, 8043-0 to 2, 8044-0 to 2, 8045-0 to 2, 8046-0 to 2,
8047-0 to 2, 8048-0 to 2, 8049-0 to 2, 8050-0 to 2, 8051-0 to 2,
8052-0 to 2, 8053-0 to 2, 8054-0 to 2, 8055-0 to 2, 8056-0 to 2,
8057-0 to 2, 8058-0 to 2, 8059-0 to 2, 8060-0 to 2, 8061-0 to 2,
8062-0 to 2, 8063-0 to 2, 8064-0 to 2,
8065-0 to 2
2 - 17
e-STUDIO2820C/2830C/3520C/3530C/4520C
SELF-DIAGNOSTIC MODE
2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio3530cE-studio4520cE-studio2830cE-studio3520c

Table of Contents