Toshiba e-STUDIO2820C Service Handbook page 410

[G] Format HDD
Format HDD if the HDD encryption function has been set (08-690).
(1) Key in [690] and then press the [START] button.
(2) Press the [ENTER] button on the LCD.
(3) When "REBOOT THE MACHINE" is displayed on the LCD, formatting of the HDD is completed.
[H] Adjust image quality
(1) Turn the power OFF and then start up with the Adjustment mode (05).
(2) Adjust the image quality control (05-396).
(3) Perform the enforced position adjustment (05-4719).
(4) Perform "Automatic gamma adjustment" <PPC> (05-1642).
1. Select the A4 (LT) drawer, key in [4], and then press the [FAX] button.
2. Set the chart, facing down on the glass, in order that the 2 black solid rectangles be placed at
the left side.
3. Key in [1642] and then press the [START] button.
4. Press the [ENTER] button on the LCD.
(5) Perform "Automatic gamma adjustment" <PRT> (05-1008).
1. Select the A4 (LT) drawer, key in [70], and then press the [FAX] button.
2. Set the chart, facing down on the glass, in order that the 2 black solid rectangles be placed at
the left side.
3. Key in [1008] and then press the [START] button.
4. Press the [ENTER] button on the LCD.
(6) Turn the power OFF.
(7) When the Fax unit (GD-1250) has been installed, perform "Clearing the image data" (1*-102).
1. Turn the power ON while pressing [1] and [*] simultaneously.
2. Key in [102] and then press the [START] button.
3. Turn the power OFF.
Notes:
Following image data are deleted when 1*-102 is performed.
• Images of fax polling transmission
• Images of fax Mailbox and box information
• Images of fax transmission
• Images of fax reception
[I] Set dial type
Set the dial type if the FAX Unit (GD-1250) is installed.
→
[USER FUNCTIONS] →[ADMIN] → [FAX] → [INITIAL SETUP]
[Power ON]
[J] Set date and time
[USER FUNCTIONS] → [ADMIN] → [GENERAL] → [CLOCK] → [DATE/TIME]
e-STUDIO2820C/2830C/3520C/3530C/4520C
REPLACEMENT OF PC BOARDS/HDD
© 2008 TOSHIBA TEC CORPORATION All rights reserved
7 - 22