Toshiba e-STUDIO2820C Service Handbook page 33

Digital
Button
key
A LCF end fence home position sensor
B LCF end fence stop position sensor
C Empty sensor at LCF standby side
D LCF side cover open/close switch
[0]
E LCF motor rotation status (Motor is rotating at
output mode (03))
F LCF tray-up sensor
G LCF feed sensor
H Empty sensor at LCF feed side
© 2008 TOSHIBA TEC CORPORATION All rights reserved
Items to check
2 - 7
Contents
Highlighted display Normal display
e.g. e.g.
Fence home posi- Other than home
tion position
Fence stop position Other than stop
position
No paper Paper present
Cover closed Cover opened
Normal rotation Abnormal rotation
Tray at upper limit Other than upper
position limit position
No paper Paper present
Paper present No paper
e-STUDIO2820C/2830C/3520C/3530C/4520C
SELF-DIAGNOSTIC MODE
2