8.2.2
System ROM
The firmware of the system ROM can be updated individually by using WA-DWNLD-350-JIG2.
Important:
•
Be sure to shut down the equipment before installing and removing the download jig.
•
Do not shut down the equipment during the update. The data could be damaged and not be
able to be operated properly.
[A] Update procedure
(1)
Write the ROM data to be updated to the download jig (PWA-DWNLD-350-JIG2).
(2)
Press the [ON/OFF] button on the control panel to shut down the equipment.
(3)
Take off the cover plate.
(4)
Connect the download jig with the jig connector (CN101) on the SYS board.
© 2008 TOSHIBA TEC CORPORATION All rights reserved
Cover plate
Fig. 8-12
Download jig
Connector
Fig. 8-13
e-STUDIO2820C/2830C/3520C/3530C/4520C
8 - 19
FIRMWARE UPDATING
8