Toshiba e-STUDIO2820C Service Handbook page 387

[4301] File conversion error
The format of this file (other than PDF and JPEG) is not supported in USB direct printing, or the file
is invalid. Check the file.
[4310] Double-sign encoding error
Printing using this function cannot be performed due to a decoding process error which occurs
because the PDF file is encrypted incorrectly or encrypted in a language not supported.
[4311] Printing not permitted
This file cannot be printed using this function due to the encrypted PDF file not permitting printing or
permitting it only with a low resolution.
[4312] Password mismatching
The entered password is neither matched with a user password nor an owner password. Check the
password again.
[A221] Print job cancellation
This message appears when deleting the job on the screen.
[A222] Print job power failure
When there are running jobs, perform the job in error again after the completion of the running jobs.
If the error still occurs, turn the power OFF and then back ON, and perform the job again.
[A290] Limit over error (black)
[A291] Limit over error (black)
[A292] Limit over error (black)
Clear the limit counter (black).
[A2A0] Limit over error (color)
[A2A1] Limit over error (color)
Clear the limit counter (color), or authorize users so that they can perform color printing.
[A2A2] Limit over error (color)
Clear the limit counter (color).
© 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2820C/2830C/3520C/3530C/4520C
ERROR CODE AND TROUBLESHOOTING
6 - 121
6