Toshiba e-STUDIO2820C Service Handbook page 234

Notes:
1. "—" is always displayed at the drive counts section for the reversing automatic document
feeder (RADF) and feed unit.
2. "—" is displayed at the numeric section for the paper source which is not installed since the
paper source is different depending on the structure of options.
2. Sub screen
1
2 3
Displaying of the sub unit (parts) name
1
Back to the main screen
2
Moving to the clear screen to clear the selected unit (parts) counters
3
Displaying of the present number of print / develop pages
4
"*" is displayed next to the present number when the number of print / develop pages has
exceeded its PM standard number.
Displaying of the standard number of print / develop pages to replace the sub unit (parts)
5
Displaying of the present drive counts
6
"*" is displayed next to the present number when the number of drive counts has exceeded its
PM standard number.
Displaying of the standard number of drive counts to replace the sub unit (parts)
7
Displaying of the number of print / develop pages and drive counts and previous replacement
8
date for a chosen sub unit
e-STUDIO2820C/2830C/3520C/3530C/4520C
PREVENTIVE MAINTENANCE (PM)
8
4
Fig. 5-4
© 2008 TOSHIBA TEC CORPORATION All rights reserved
5 - 4
5 6 7