Setting Range Correction (Adjustment Of Background Peak) - Toshiba e-STUDIO2820C Service Handbook

3.4.7

Setting range correction (Adjustment of background peak)

The levels of the background peak for the range correction at the Black Mode can be set at the follow-
ing codes.
Black
Original mode
Text/
Text Photo
Photo
7460 7461 7462
7490 7491 7492
Color
Original mode
Printed
Text Photo
Image
8366 8367 8368
8376 8377 8378
<Procedure>
The procedure is the same as that of
© 2008 TOSHIBA TEC CORPORATION All rights reserved
Gray
Item to be adjusted
Scale
User
custom
7464 7463 Background peak
adjustment for range
correction in the auto-
matic density mode
7494 7493 Background peak
adjustment for range
correction in the man-
ual density mode
Item to be adjusted
User
custom
8369 Background peak adjustment for
range correction in the automatic
density mode
8384 Background peak adjustment for
range correction in the manual
density mode
P.3-57 "3.4.2 Density adjustment".
3 - 61
<Adjustment Mode (05)>
Remarks
The larger the value is, the lower
the density of the image back-
ground (low density section)
becomes.The smaller the value
is, the higher the density of the
image background (low density
section) becomes.Acceptable
values: 0 to 255
Remarks
The larger the value is, the lower
the density of the image back-
ground (low density section)
becomes.The smaller the value
is, the higher the density of the
image background (low density
section) becomes.Acceptable
values: 0 to 255
e-STUDIO2820C/2830C/3520C/3530C/4520C
ADJUSTMENT
3