Options - Toshiba e-STUDIO2820C Service Handbook

1.3

Options

Original Cover
Reversing Automatic Document Feeder (RADF)
Large Capacity Feeder (LCF)
Paper Feed Pedestal (PFP)
Drawer Module
Finisher
Saddle Stitch Finisher
Hanging Finisher
Hole Punch Unit
Staple Cartridge
Bridge Kit
Work Table
EFI Printer Board
FAX Unit
2nd Line for Fax Unit
Wireless LAN Module
Bluetooth Module
Antenna
Data Overwrite Enabler
Meta Scan Enabler
External Interface Enabler
IPSec Enabler
Harness Kit for Coin Controller
e-BRIDGE ID Gate (HID)
e-BRIDGE ID Gate (MIFARE)
Imaging Acceleration Board
Damp Heater Kit
Desk
Notes:
• The bridge kit (KN-4520) is necessary for installation of the finisher (MJ-1101/1030/1031).
• The finisher (MJ-1101) is necessary for installation of the hole punch unit
(MJ-6101N/E/F/S/E-C).
• The finisher (MJ-1030) is necessary for installation of the hole punch unit (MJ-6004N/E/F/S).
• The antenna (GN-3010) is necessary to enable the wireless LAN module (GN-1050/C) and
the bluetooth module (GN-2010).
e-STUDIO2820C/2830C/3520C/3530C/4520C
SPECIFICATIONS/ACCESSORIES/OPTIONS/SUPPLIES
KA-3511PC/PC-C
MR-3018
KD-1024LT/A4/C
KD-1023/C
MY-1032/C
MJ-1101
MJ-1030/C
MJ-1031/C
MJ-6101N/E/F/S/E-C (for MJ-1101)
MJ-6004N/E/F/S (for MJ-1030)
STAPLE-2400 (for MJ-1101)
STAPLE-2000 (for MJ-1030/1031)
STAPLE-600 (for saddle stitcher of
MJ-1030)
KN-4520
KK-3511
GA-1211
GD-1250NA/AU/AS/EU/C/TW
GD-1260NA/AU/EU/C/TW
GN-1050/C
GN-2010
GN-3010
GP-1070
GS-1010
GS-1020
GP-1080
GQ-1110
KP-2004
KP-2005
GE-1170
MF-3500CU/CE
MH-1700
© 2008 TOSHIBA TEC CORPORATION All rights reserved
1 - 12