Output Channel - Toshiba e-STUDIO2820C Service Handbook

9.4

Output Channel

The following are 2 output channels for the main switch line.
• +5.1 V
+5.1VS: CN402 Pin 6
Output to the SYS board
+5.1VA: CN402 Pins 8, 9 and 10
Output to the SYS board
+5.1VB: CN402 Pins 19 and 20
Output to the SYS board
+5.1VB: CN403 Pins 2 and 3
Output to the IMG board
+5.1VB: CN404 Pin 1
Output to the LGC board
+5.1VB: CN405 Pin 1
Output to the LGC board, PFP/LCF board (via LGC board)
+5.1VB: CN406 Pin 4
Output to the Finisher
+5.1VB: CN407 Pin Pin 1 and 2
Output to the SLG board, RADF
+5.1VB: CN410 Pin 1
Output to the FIL board
• +12 V
+12VA: CN402 Pins 13 and 14
Output to the SYS board
+12VB: CN402 Pin 18
Output to the SYS board
+12VB: CN404 Pin 7
Output to the LGC board
+12VB: CN407 Pin 14
Output to the SLG unit
© 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2820C/2830C/3520C/3530C/4520C
9 - 3
POWER SUPPLY UNIT
9