Toshiba e-STUDIO2820C Service Handbook page 474

The following are 2 output channels for the cover switch line.
• +5.1 V
+5.1VD: CN405 Pin 4
Output to the LGC board
• +24 V
+24VD1: CN405 Pin 5
Output to the LGC board
+24VD2: CN405 Pin 6
Output to the LGC board
+24VD3: CN405 Pin 7
Output to the LGC board, PFP/LCF (via LGC board)
High-voltage transformer (via LGC board)
+24VD4: CN406 Pin 2
Output to the Finisher
+24VD4: CN407 Pins 9, 10, 11 and 12
Output to the Finisher
Output voltage by the type of connector
Main switch line
Connector
CN402 For the SYS board
CN403 For the IMG board
CN404 For the LGC, PFP/LCF (via LGC board)
CN405 For the LGC board
CN406 For the finisher
CN407 For the SLG board, RADF
CN410 For the FIL board
Cover switch line
Connector
CN405 For the LGC board, PFP/LCF (via LGC
board, high-voltage transformer (via LGC
board)
CN406 For the finisher
CN407 For the SLG board, RADF
e-STUDIO2820C/2830C/3520C/3530C/4520C
POWER SUPPLY UNIT
Destination
Destination
9 - 4
Voltage
+5.1VA, +5.1VB, +5VS, +12VA, +12VB
+5.1VB
+5.1VB, +12VB
+5.1VB
+5.1VB
+5.1VB, +12VB
+5.1VB
Voltage
+5.1VD, +24VD1, +24VD2, +24VD3
+24VD4
+24VD
© 2008 TOSHIBA TEC CORPORATION All rights reserved