Toshiba e-STUDIO2820C Service Handbook page 237

Main screen
2nd CST.
[2nd drawer]
SFB
[Bypass unit]
RADF
LCF
3rd CST.
[PFP upper drawer]
4th CST.
[PFP lower drawer]
Note:
When the counter value of any of the pickup roller, feed roller and separation roller in each unit is
reset, the value of the feeding retry counter is also reset simultaneously. When the [RESET] but-
ton is pressed after selecting the feed unit in the Main Screen, the value of the feeding retry
counter is also reset simultaneously.
The feeding retry counter:
• 1st drawer
• 2nd drawer
• PFP upper drawer Reset the feeding retry counter (08-1392)
• PFP lower drawer Reset the feeding retry counter (08-1393)
• Bypass unit
• LCF
© 2008 TOSHIBA TEC CORPORATION All rights reserved
PICK UP ROLLER (2nd CST.)
FEED ROLLER (2nd CST.)
SEP ROLLER (2nd CST.) [Separation roller]
PICK UP ROLLER (SFB)
FEED ROLLER (SFB)
SEP ROLLER (SFB) [Separation roller]
PICK UP ROLLER (RADF)
FEED ROLLER (RADF)
SEP ROLLER (RADF) [Separation roller]
PICK UP ROLLER (LCF)
FEED ROLLER (LCF)
SEP ROLLER (LCF) [Separation roller]
PICK UP ROLLER (3rd CST.)
FEED ROLLER (3rd CST.)
SEP ROLLER (3rd CST.) [Separation roller]
PICK UP ROLLER (4th CST.)
FEED ROLLER (4th CST.)
SEP ROLLER (4th CST.) [Separation roller]
Reset the feeding retry counter (08-1390)
Reset the feeding retry counter (08-1391)
Reset the feeding retry counter (08-1394)
Reset the feeding retry counter (08-1395)
5 - 7
Sub-screen
e-STUDIO2820C/2830C/3520C/3530C/4520C
PREVENTIVE MAINTENANCE (PM)
5