Installing The 1 Bin Saddle-Stitch Finisher (Da-Fs355A) - Panasonic DP-3510 Service Manual

8.30. Installing the 1 Bin Saddle-Stitch Finisher (DA-FS355A)

8.30.1. Contents
Qty.
1 1 Bin Saddle-Stitch Finisher
1 Stapler
1 Delivery Tray
1 Stand
Exit Roller U Assembly
1
1 Exit Roller Gear 1 (White)
1 E-Ring
1 Latch Plate
6 Screw (M4 x 7)
4 Silver Screw (M3 x 10)
2 Silver Screw (M4 x 30)
1 IPC PC Board
2 Spacer
1 Label
1 Installation Instructions
Note:
1. The part number may differ depending on the Destination.
2. Refer to the Parts List in the Parts Manual.
3. Before you begin the installation of your 1 Bin Saddle-Stitch Finisher (DA-FS355A), read
these entire instructions.
8.30.2. Installation
CAUTION!
Turn the Power Switch on the Left Side and the Main Power Switch on the Back of the
machine to the OFF position, and then unplug the AC Power Cord before beginning
installation.
3.9 in
(100 mm)
57.6 in
(1463 mm)
Ver. 5.2
Description
3.9 in
(100 mm)
3.9 in
(100 mm)
3.9 in
74.2 in (100 mm)
(1885 mm)
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
Part No.
See Note
PF4117K226A
PF4117K225A
PF4117K604A
DZHP007718
FFPMF1069
See Note
PF4117K101A
See Note
See Note
See Note
PF4117P003
PF4117K254
DZNK004315
DZSM000759
1. Selecting the Installation Site
Make sure that there will be adequate space for the
work (i.e. removal of paper, etc.).
Make sure also that the Finisher will be placed on the
same floor surface as its host machine
(i.e. at the same height, slope, etc.).
394
Remarks
Except for USA and
Canada
Except for USA and
Canada
Used for DP-45xx
Used for DP-45xx
This document
JAN 2006