Panasonic DP-3510 Service Manual page 325

(16)
(20)
Ver. 5.2
(17)
(19)
(18)
(22)
(21)
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(15) Connect one end of the MJR Harness and
Speaker Harness 2 to the MJR PC Board
Assembly Connectors (CN22 and CN25).
(16) Install the MJR PC Board Assembly from the
rear of the machine by inserting the Hooks into
the slots on the frame.
(17) Secure the MJR PC Board Assembly with 5
Screws (Short).
(18) Remove 1 Screw from the SC PC Board.
(19) Install the SDRAM Bracket into the machine and
secure it with 1 Screw removed in Step (18).
(20) Route the Harnesses and pass through the
frame in the rear of the unit as illustrated.
(21) Secure the Harnesses to the 2 Harness Clamps.
(22) Secure the Harness to the Harness Clamp.
325
JAN 2006