(22)
(22)
(29)
(28)
Ver. 5.2
(21) Install the Upper Support Plate by sliding it on
(22)
(22) Secure the Plates with 4 Screws.
(21)
(23) Install the Door (Large) onto the Mounting Pins.
(24)
(23)
(24) Secure with 1 Screw.
(25) Place a sheet of paper and close the Door
(26) Turn the Power Switches On.
(27) After the Tray comes up, turn the Power
(28) Remove 1 Screw.
(29) Remove the Sensor Assy from the Letter
355
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
the Guide Screw holes as illustrated.
(Large).
Switches Off.
Position.
JAN 2006