Installing The Printer Controller Module For Pcl6 (Da-Pc302) - Panasonic DP-8032 Service Manual

8.2.

Installing the Printer Controller Module for PCL6 (DA-PC302)

8.2.1. Contents
Visually check the condition and contents of the box for completeness, or for any shipping damage before
starting the installation.
Remove all tapes, and the packing materials used to secure the units during shipment.
After unpacking, dispose the packing materials appropriately.
No. Qty.
1 1
2 1
3 2
4 1
5 1
6 1
1
Note:
Refer to the Parts Manual for Part Number(s), Packing, and Accessories detail.
8.2.2. Installation
CAUTION!
Turn the Power Switch on the Left Side, and the Main Power Switch on the Back of the
machine to the OFF position, and then unplug the AC Power Cord before beginning
installation.
Caution:
Before installing this option, make sure the Program Expansion Board (DA-EM600) is installed into
Slot 1 on the SC PC Board (CN62) first. Refer to the Installation Instructions of the Program
Expansion Board (DA-EM600).
Ver.1.2
Description
Hardware Key
Software CD
Locking Spacer
FRM8 PCB ASSY
Installation Instructions
Installation Instructions
2 3
PCL KEY
Includes Operating Instructions
For Europe Only
For Europe Only
DA-EM600 : For Europe Only
This document
4 5
(1) Remove 4 Silver Screws.
(2) Open the Rear Cover.
260
DP-8032/8025
Remarks
6
2008