Panasonic DP-3510 Service Manual page 378

(18)
(16)
(20)
(22)
(21)
(22)
(23)
Ver. 5.2
(18)
(17)
(16)
(19)
(20)
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(16) Insert the bottom 2 Silver Screws (M4 x 12) first
and tighten them 1/2 way.
(17) Place the Latch Plate on top of these Silver
Screws (M4 x 12).
(18) Install the upper 2 Silver Screws (M4 x 12), and
then tighten all the 4 screws.
Note:
If the Punch Unit (DA-SP31) is also being
installed, before continuing to the next step, install
the Punch Unit (DA-SP31) first.
(19) Install the Inlet Guide.
(20) Secure it with 2 Silver Screws (M3 x 10).
(21) Install the Guide Rail to the back of the machine
as illustrated.
(22) Secure it with 3 Screws (M4 x 8).
(23) Remove 2 Black Shipping Screws.
378
JAN 2006