Panasonic DP-3510 Service Manual page 390

(8)
(9)
(10)
(11)
(12)
(18)
(20)
(19) (17)
(16)
Ver. 5.2
(8) Remove 2 Screws.
(9) Remove the Exit Guide 1 Assembly.
(8)
(10) Remove 2 Screws.
(11) Remove and replace the Exit Roller E Assembly
with the Exit Roller U Assembly.
(10)
(12) Secure the Exit Roller U Assembly with 2
Screws.
(13) Reinstall the Exit Guide 1 Assembly and Exit
(12)
Guide 3 Assembly.
(14) Close the Upper Exit Cover.
(15) Place the Front Magnet Catch Plate.
(16) Insert the lower 1 Screw (M3 x 10) and tighten it
1/2 way.
(17) Install the upper 1 Screw (M3 x 10), and then
tighten both screws.
(18) Place the Rear Magnet Catch Plate.
(15)
(19) Insert the lower 1 Screw (M3 x 10) and tighten it
1/2 way.
(20) Install the upper 1 Screw (M3 x 10), and then
tighten both screws.
390
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
JAN 2006