Panasonic DP-3510 Service Manual page 743

11.3.2.3.3. Delivery Operation after Stapling
When stapling is complete, the Finisher Controller PCB drives the Deliver Motor in the forward direction to
feed the paper stack (sandwiched between the Stack Delivery Rollers) in the delivery direction.
The Delivery Belt Home Position Sensor is turned OFF. The Delivery Motor is driven a specified number of
pulses, causing the Swing Guide to ascend. At the same time, the Slide Motor is driven to return the stapler
back to the standby position, followed by driving of the Delivery Motor. Then, the paper stack is delivered
with the nails of the Delivery Belt that rotates in sync with the Stack Delivery Rollers.
Ver. 5.2
Paper Stack
Delivery Tray
Paddle Motor (M2)
Staple Safety
Switch (MS3)
Swing Guide
Stack Delivery Roller (Lower)
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
Swing Guide
Delivery Belt
Stack Delivery
Roller (Lower)
Fig. 2-026
Swing Guide
Home Position Sensor (PI3)
Stack Delivery Roller (Upper)
Fig. 2-027
743
Stapler
Light-Shielding Plate
JAN 2006