Installing The Printer Controller Module For Pcl6 (Da-Pc190: Uf-9000; - Panasonic UF-9000 Service Manual

8.2. Installing the Printer Controller Module for PCL6
(DA-PC190: UF-9000; DA-PC188: DP-180/190)
8.2.1. Contents
Qty.
1 Hardware Key
1 Software CD
1
License Agreement
1
1 Installation Instructions
Note:
1.The part number may differ depending on the Destination.
2. Refer to the Parts List in the Parts Manual.
8.2.2. Installation
1. Before installing this option, make sure the Program Expansion Board (DA-EM600) is installed
into Slot 1 on the SC PC Board first. Refer to the Installation Instruction of the Program
Expansion Board (DA-EM600).
2. Install the Hardware Key by following the steps below.
CAUTION!
Turn the Power Switch on the Left Side of the machine to the OFF position, and then
unplug the AC Power Cord before beginning installation. (During a Lightning Storm, to
prevent electrocution disconnect the Telephone Line Cable first before unplugging the
AC Power Cord.)
Ver. 1.0
Description Part No.
----- PCL KEY
DZHP009971 Includes Operating Instructions
DZSH000112 For USA and Canada only
DZSH000113 For Other Destinations
DZSM000795 This document
(1) Remove the Rear Paper Tray Cover.
(2) Remove 5 Silver Screws.
(3) Remove the Right Cover.
196
UF-9000
DP-180/190
Remarks
JAN 2004