Panasonic DP-3510 Service Manual page 719

2. Punch Unit (Option)
Item
Punching Method
Paper Size
Paper Weight
Punch Hole Diameter
Punch Waste
Size (W x D x H)
Weight
Power Supply
Maximum Power
Consumption
Manual Stapling
Folding Method
Folding Mode
Folding Position
Saddling Size
Ver. 5.2
Description
Reciprocating method
(sequential processing method)
2- / 3-hole (Punch Unit DA-SP41-PU) :
2-hole / LGL, LTR-R
3-hole / LDR, LTR
4-hole (Punch Unit DA-SP41-PB) :
A3, A4
2 2
64 g/m ~ 133 g/m
2-/3-hole (Punch Unit DA-SP41-PU) :
2-hole 0.31 in / 8.0 mm
3-hole 0.31 in / 8.0 mm
4-hole (Punch Unit DA-SP41-PB) :
0.26 in / 6.5 mm
2-/3-hole (Punch Unit DA-SP41-PU) :
2-hole / 1500 sheets
3-hole / 1500 sheets
4-hole (Punch Unit DA-SP41-PB) :
1500 sheets
3.54 x 22.05 x 6.69 in
(90 x 560 x 170 mm)
5.5 lb (2.5 kg) (approx.)
24 VDC / 5 VDC supplied by the Finisher Unit.
Standby : 2 W max.
Operating : 21 W max. (punching)
None
Roller contact
Double-folding (single-sheet non-stapling available)
Center of sheet
A3, A4-R, B4, LDR, LTR-R
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
Table 1-002
719
Remarks
For USA and Canada
For EU and Other
Destinations
No transparencies.
For USA and Canada
For EU and Other
Destinations
For USA and Canada
For EU and Other
Destinations
Requires a margin of ± 0.2
1n (± 5 mm) in the center of
the sheet for a middle
margin.
No special paper.
JAN 2006