Panasonic DP-3510 Service Manual page 551

1. Receiving Sheets
The Saddle Stitch Unit receives the sheets from the Finisher unit and sends them to the vertical path in
a vertical orientation.
The vertical path assembly uses two deflecting plates and a paper positioning plate to position the
center of the stack so it matches the stapling / folding requirements.
Sheets coming later are output closer to the delivery slot, and the volume of paper that may be output
is as follows:
• 15 sheets (maximum of 14 sheets of 80g/m
2. Aligning the Sheets
The Alignment Plates operate to set the sheets in order each time a sheet of paper is sent to the
vertical path assembly. The Alignment Plates are mounted at the edge of the vertical path assembly.
The Alignment Plates also operate after stapling to prepare the stack for delivery.
Ver. 5.2
2
+ 1 sheet of 133g/m
Direction of delivery
2nd Sheet
Fig. 3-009
Alignment Plate
Fig. 3-010
551
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
2
)
1st Sheet
Paper Positioning Plate
Sheets
Alignment Plate
Paper Positioning Plate
JAN 2006