Panasonic DP-3510 Service Manual page 757

11.3.2.6. Punch Unit (Option)
11.3.2.6.1. Basic Operations
1. Outline
The Punch Unit is an option and is designed for installation to the Pickup Assembly of the Finisher. The
Punch Unit is not equipped with a paper feeding mechanism, and the sheets from the Host Machine
move through the Punch Unit and then the feed system of the Finisher.
When the trailing edge of a sheet from the Host Machine reaches the Punch Unit, the sheet is stopped
once, and the Punch Shaft is rotated to punch a hole along the trailing edge. These operations are
controlled with various commands from the Finisher Controller PCB as well as the commands from the
Punch Controller PCB.
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
Punch Drive System
Horizontal Registration
Drive System
Punch Controller
PCB
Fig. 2-047
757
JAN 2006