Installing The 2 Bin Finisher (Da-Fs330) - Panasonic DP-3510 Service Manual

8.29. Installing the 2 Bin Finisher (DA-FS330)

8.29.1. Contents
Qty.
1 2 Bin Finisher
1 Upper Tray
1 Guide Bar
1 Lower Tray
1 Stand
1 Front Cover
1 Rear Cover
1 Front Magnet Catch Plate
1 Rear Magnet Catch Plate
1 Switch Bracket
1 Locking Clamp
Exit Roller U Assembly
1
2 Screw (M4 x 8)
2 Screw (M4 x 10)
2 Screw (M4 x 30)
6 Screw (M3 x 10)
1 Installation Instructions
Note:
1. The part number may differ depending on the Destination.
2. Refer to the Parts List in the Parts Manual.
3. Before you begin the installation of your 2 Bin Finisher (DA-FS330), read these entire
instructions.
8.29.2. Installation
CAUTION!
Turn the Power Switch on the Left Side and the Main Power Switch on the Back of the
machine to the OFF position, and then unplug the AC Power Cord before beginning
installation.
3.9 in
(100 mm)
57.6 in
(1463 mm)
Ver. 5.2
Description
3.9 in
(100 mm)
3.9 in
(100 mm)
3.9 in
(100 mm)
63.0 in
(1600 mm)
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
Part No.
See Note
GP01-3415
GH03-3103
GP01-3403
DZJA001230
DZJE001064
DZJE001065
DZJA001226
DZJA001227
DZJA001225
GS01-6503
DZHP007718
See Note
See Note
See Note
See Note
DZSM000570
1. Selecting the Installation Site
Make sure that there will be adequate space for the
work (i.e. removal of paper, etc.).
Make sure also that the Finisher will be placed on the
same floor surface as its host machine
(i.e. at the same height, slope, etc.).
388
Remarks
Assembled
Except for USA and
Canada
This document
JAN 2006