Finisher Options; Da-Fs600, Da-Fs605, Da-Sp31 - Panasonic DP-3510 Service Manual

11 Finisher Options

11.1. DA-FS600, DA-FS605, DA-SP31

11.1.1. Introduction
11.1.1.1. Features
1. Large Tray Capacity.
Normally, the Finisher holds a stack of sheets 5.78" (147 mm) in height in its two bins (small-size
paper: equivalent to 1000 sheets) / 2.91" (74 mm) in height (large-size paper: equivalent to 500 sheets)
2. Handles Wide Variety of Paper Thickness.
The Finisher is capable of handling papers between 17 - 35.5 lb (64 - 133 g/m
3. Job Offset Function.
The Finisher has a job offset function for sorting non-stapled stacks of copies.
4. Four Types of Auto Stapling.
The Finisher offers a choice of four stapling modes (1-point stapling at rear, diagonal stapling in front,
diagonal stapling at rear, and 2-point stapling).
5. Buffer Roller.
The use of a buffer roller enables the finisher to accept copies without interruption from the Copier
even during stapling or offset operation.
6. Saddle Stitch Function.
The Finisher can staple along the center of paper and fold it in two (up to 15 sheets).
7. Punch Function (Option).
The Punch Unit enables the Finisher to punch the binder sheets before they are ejected. (The Punch
Unit is capable of handling plain papers between 17 - 35.5 lb (64 - 133 g/m
handle special papers, postcards, transparencies, etc.)
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
475
2
).
2
). The Punch Unit cannot
JAN 2006