Panasonic DP-3510 Service Manual page 391

(21)
(23)
(3)
(1)
(2)
Rail
Ver. 5.2
(22)
(3)
(2)
Finisher
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(21) Secure the Switch Bracket with 2 Screws
(M3 x 10).
Note:
Adjustment of the Bracket position is performed at
the end of the installation (See step 8 - 3).
(22) Remove the 2 Protective Tabs using a Phillips
type Screw Driver as illustrated.
(23) Remove the 2 Protective Tabs using a Nipper.
4. Attaching to the Host Machine
Caution:
Be sure install both the Finisher and Host Machine
on a level floor. A stepped or slanted floor can
result in improper paper feed.
(1) Fit the hooks of the Stand into the mounting
holes on the side panel of the Host Machine.
(2) Secure the Stand with 2 Screws (M4 x 30).
(3) Slide the Rails of the Stand to the left as
illustrated.
(4) Place the Finisher on the Rails.
391
JAN 2006