Installing The Punch Unit (Da-Sp31) - Panasonic DP-3510 Service Manual

8.28. Installing the Punch Unit (DA-SP31)

8.28.1. Contents
Qty.
1 Punch Unit
1 Punch Lower Cover
1 Punch Relay Harness
1 Upper Cover Guide
1 Guide Plate (Long)
1 Jam Removal Instructions Label
2 Shoulder Screw (Silver)
2 Stepped Mounting Screw (Silver)
1 Black Screw (M4 x 6)
2 Silver Screw (M4 x 12)
1 Installation Instructions
Note:
1. The part number may differ depending on the Destination.
2. Refer to the Parts List in the Parts Manual.
8.28.2. Installation
CAUTION!
Turn the Power Switch on the Left Side and the Main Power Switch on the Back of the
machine to the OFF position, and then unplug the AC Power Cord before beginning
installation.
Guide Plate (Short)
Ver. 5.2
Description
Preparing the Host Machine for Installation
(1) Remove the bottom 3 Screws, and remove
(1)
384
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
Part No.
See Note
4A1-8409-000
FF3-4067-000
4A1-8408-000
4B1-0949-000
FB5-5924-000
See Note
See Note
See Note
See Note
DZSM000567 This document
Guide Plate (Short).
Remarks
JAN 2006